CONTACT

Address:
Unit#E,2nd Floor No.55,Allameh Tower, North Allameh St, East Sarv St.kaj Square,Saadat-Abad Ave,Tehran, Iran.
Calling Time:
Saturday to Wednesday from 9 Am to 5 Pm & Thursday 9 Am to 1 Pm- Iranian local time is + 3.5 Hrs (GMT).
Tel:
+9821 - 22063227
+9821 - 22092057
+9821 - 22099131
Fax:
+9821 – 89774992
Post code:
1997855449
Email:
info@mineralco.net

MINERAL AGENTS

Australian office ready to give services to all clients in Australia , New Zealand & neighbor
Home > Products > Oil well drilling fluid & Mud > Drill FLC - LT

PRODUCTS

Product Description

 

DRILL FLC – LT is a natural ashphaltic material. It has been selected to give a specific softening and melting point. When used in oil base drilling fluid.

 

Typical Physical Properties

Appearance: Black powder

Specific Gravity  @ 20°C: 1.15 to 1.20 Gr/Cm3

Pour Point: Not applicable

Flash Point: Not applicable

Solubility: Oil

Recommended Treatment

 

DRILL FLC – LT is suitable to be used at temperature not more that 180 F as it becomes completely dissolved in diesel at such temperature. In this case the viscosity of diesel will be increased that causes problems on rheology control particularly on surface pits.

 

DRILL FLC –LT should be used throuch the mud hopper at the rate of 10-15 minutes per bag.

The normal treatment is depends on the amount of O/W ratio and mud weight. However higher O/W ratio requires more DRILL FLC – LT (approximately 8-12 LB/BBL) than lower O/W ratio.

 

Product Handling Details

 

FLC is considered harmful to men, and handling precautions should be taken as follows

 

Eyes that have been exposed to FLC should be washed thoroughly with clean water and a doctor consulted.

 

Skin that has been exposed to FLC should be washed with soap and water and cream applied.

 

If DRILL FLC - LT dist is inhaled, move to fresh air and consult a doctor.

If DRILL FLC – LT is swallowed, do not induce vomiting, but have patient drink large volumes of water.DRILL FLC –LT should be used throuch the mud hopper at the rate of 10-15 minutes per bag.


The normal treatment is depends on the amount of O/W ratio and mud weight. However higher O/W ratio requires more DRILL FLC – LT (approximately 8-12 LB/BBL) than lower O/W ratio.

 

Product Packing Details

FLC is supplied in 25-kg sacks